Twfta Marketplace
Products Companies Find Suppliers Find buyer
 
Coil Winding Wire Tensioner, Magnetic Wire Tensioner, Mechanical Wire Tensioner  

 
  Company Profile
  Products Showroom
  Contact Us
 




 

High Wear Resistance Ruby Wire Guide With Ra0.1 Roughness




        Inquiry   Now      
        Contact   Info       
   
   


1.Material: Rubyinwireoutlet , Ceramicinwireinlet , Stainlesssteelbody

2.Application: CNCautomaticwindingmachine

3.rubynozzleforNittokuwindingmachine

4.rubytipcoilwindingnozzle




High Wear Resistance Ruby Wire Guide With Ra0.1 Roughness



- - - -
PlaceofOrigin: | DongGuanChina |
BrandName: | KIMCHEN |
Material: | Rubyinwireoutlet |
Ceramicinwireinlet |
Stainlesssteelbody |
Application: | CNCautomaticwindingmachine |
Polish: | Precisiongrinding |
RoughnessofRplace: | Ra0.025 |
Roughnessofbore: | Ra0.1 |
WorkLimit: | d1>0.2mmD1>0.7mm |
Function: | Protectenameled-wire |
Suitableforuse: | wirewindingoffinecoilandthincoil |
- - - -



Detailed Product Description:

Ruby Nozzle is made of two main parts, stainless steel and the processed ruby. It has been widely used in CNC automatic winding machine.

The Ruby Material has the characteristics of extremely hard and wear-resistant by precise processing and combination. The rigidity of ruby is above than level 9 and is just less than that of diamond. Ruby nozzle guide is a single crystal and can be made with high brightness and cleanness. It can effectively protect paint film and ling term continual work.

Product Features:

1. High Wear Resistance This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.

2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.

3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.

4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right


Application:

Wire coiling of fine coil and thin coil of various automatic winding machines.
Work Limit: d1>0.2mm D1>0.7mm







- - - -
Seriesoffixingdimension2 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0326-2-1006 | 26 | 6 | 2 | 1.0 | 0.3 | 0.6 | N/A |
2 | RC0326-2-0806 | 26 | 6 | 2 | 0.8 | 0.3 | 0.6 | N/A |
3 | RC0330-2-0807 | 30 | 7 | 2 | 0.8 | 0.3 | 0.4 | N/A |
4 | RC0335-2-0810 | 35 | 10 | 2 | 0.8 | 0.3 | 0.4 | N/A |
5 | RC0535-2-1008 | 35 | 8 | 2 | 1.0 | 0.5 | 0.5 | N/A |
6 | RC0535-2.5-1411 | 35 | 11 | 2.5 | 1.4 | 0.5 | 0.8 | N/A |
7 | RC0336-2.5-1011 | 36 | 11 | 2.5 | 1.0 | 0.3 | 0.6 | N/A |
8 | RR0635-2-1610 | 35 | 10 | 2 | 1.6 | 0.6 | 0.8 | N/A |
9 | RS0535-2.5-1210 | 35 | 10 | 2.5 | 1.2 | 0.5 | 0.8 | N/A |
10 | RC0530-2-1208 | 30 | 8 | 2 | 1.2 | 0.5 | 0.6 | N/A |
10 | RS0830-2 | 30 | N/A | 2 | 2 | 0.8 | 0.8 | N/A |
- - - -




- - - -
Seriesoffixingdimension3 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0330-3-1007 | 30 | 7 | 3 | 1.0 | 0.3 | 0.8 | N/A |
2 | RC0330-3-0807 | 30 | 7 | 3 | 0.8 | 0.3 | 0.6 | N/A |
3 | RC0430-3-1210 | 30 | 10 | 3 | 1.2 | 0.4 | 0.6 | N/A |
4 | RC0530-3-1311 | 30 | 11 | 3 | 1.3 | 0.5 | 0.8 | N/A |
5 | RC0630-3-1511 | 30 | 11 | 3 | 1.5 | 0.6 | 0.8 | N/A |
6 | RC0323-3-1007P | 23 | 7 | 3 | 1.0 | 0.3 | 0.8 | 16 |
7 | RC0511-3-1506P | 11 | 6 | 3 | 1.5 | 0.5 | 0.6 | 5 |
8 | RC0514-3-1509P | 14 | 9 | 3 | 1.5 | 0.5 | 0.6 | 5 |
9 | RC0311-3-1006P | 11 | 6 | 3 | 1.0 | 0.3 | 0.6 | 5 |
10 | RC0314-3-1009P | 14 | 9 | 3 | 1.0 | 0.3 | 0.6 | 5 |
11 | RC0530-3-1455 | 30 | 5.5 | 3 | 1.4 | 0.5 | 0.6 | N/A |
12 | RC0530-3-1465 | 30 | 6.5 | 3 | 1.4 | 0.5 | 0.6 | N/A |
13 | RC0330-3-1535P | 30 | 3.5 | 3 | 1.5 | 0.3 | 0.5 | 13 |
14 | RC0330-3-1012 | 30 | 12 | 3 | 1.0 | 0.3 | 0.6 | N/A |
15 | RS0821-3-2015P | 21 | 15 | 3 | 2.0 | 0.8 | 1.0 | 6 |
16 | RC0615-3-1505 | 15 | 5 | 3 | 1.5 | 0.6 | 0.6 | N/A |
17 | RC0530-3-2014 | 30 | 14 | 3 | 2.0 | 0.5 | 0.5 | N/A |
18 | RC0426-3-1208 | 26 | 8 | 3 | 1.2 | 0.4 | 0.6 | N/A |
19 | RC0317-3-0812 | 17 | 12 | 3 | 0.8 | 0.3 | 0.4 | N/A |
20 | RC0414-3-1309 | 14 | 9 | 3 | 1.3 | 0.4 | 0.6 | N/A |
21 | RC0314-3-1015 | 14 | 1.5 | 3 | 1.0 | 0.3 | 0.6 | N/A |
22 | RR0314-3-1003 | 14 | 3 | 3 | 1.0 | 0.3 | 0.5 | N/A |
23 | RC03186-3-0805 | 18.6 | 5 | 3 | 0.8 | 0.3 | 0.4 | N/A |
24 | RC0334-3-1035P | 34 | 3.5 | 3 | 1.0 | 0.3 | 0.6 | 8 |
25 | RC1030-3-2514 | 30 | 14 | 3 | 2.5 | 1.0 | 1.2 | N/A |
26 | RS0522-3-1608P | 22 | 8 | 3 | 1.6 | 0.5 | 0.8 | 14 |
27 | RC0422-3-1208P | 22 | 8 | 3 | 1.2 | 0.4 | 0.6 | 14 |
28 | RS1030-3-20145 | 30 | 14.5 | 3 | 2.0 | 1.0 | 1.2 | N/A |
29 | RS08115-3-2006P | 11.5 | 6 | 3 | 2.0 | 0.8 | 1.1 | 5 |
30 | RS15115-3P | 11.5 | N/A | 3 | N/A | 1.5 | 2.0 | 5.5 |
31 | RR08115-3-2055P | 11.5 | 5.5 | 3 | 2.0 | 0.8 | 0.8 | 6 |
32 | RR08145-3-2085P | 14.5 | 8.5 | 3 | 2 | 0.8 | 0.8 | 6 |
33 | RR10105-3 | 10.5 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
34 | RR1014-3 | 14 | N/A | 3 | N/A | 1.0 | 1.0 | N/A |
35 | RC1030-3-2013 | 30 | 13 | 3 | 2.0 | 1.0 | 1.0 | N/A |
36 | RC0825-3-2520 | 25 | 20 | 3 | 2.5 | 0.8 | 1.0 | N/A |
37 | RC0829-3-2015 | 29 | 15 | 3 | 2 | 0.8 | 1.2 | N/A |
38 | RS0626-3-1420 | 26 | 20 | 3 | 1.4 | 0.6 | 0.8 | N/A |
39 | RS0625-3-2520 | 25 | 20 | 3 | 2.5 | 0.6 | 0.8 | N/A |
40 | RC0430-3-1065 | 30 | 6.5 | 3 | 1.0 | 0.4 | 0.6 | N/A |
41 | RC0630-3-1465 | 30 | 6.5 | 3 | 1.4 | 0.6 | 0.8 | N/A |
42 | RC0545-3-1315 | 45 | 15 | 3 | 1.3 | 0.5 | 0.6 | N/A |
43 | RC0530-3-1006 | 30 | 6 | 3 | 1.0 | 0.5 | 0.8 | N/A |
44 | RC0630-3-1406 | 30 | 6 | 3 | 1.4 | 1.2 | 0.6 | N/A |
- - - -



- - - -
Seriesoffixingdimension4 |
Serial | Model | Specification(mm) |
L | L1 | D | D1 | d1 | d2 | H |
1 | RC0843-4-2014P | 43 | 14 | 4 | 2.0 | 0.8 | 0.8 | 20 |
2 | RS0843-4-2014P | 43 | 14 | 4 | 2.0 | 0.8 | 1.0 | 20 |
3 | RC0330-4-1515 | 30 | 15 | 4 | 1.5 | 0.3 | 0.6 | N/A |
4 | RC0330-4-1415 | 30 | 15 | 4 | 1.4 | 0.3 | 0.5 | N/A |
5 | RC0340-4-1006 | 40 | 6 | 4 | 1.0 | 0.3 | 0.6 | N/A |
6 | RC0330-4-1415 | 30 | 15 | 4 | 1.4 | 0.3 | 0.6 | N/A |
7 | RC1043-4-2514P | 43 | 14 | 4 | 2.5 | 1.0 | 1.2 | 20 |
8 | RS1230-4-2515 | 30 | 15 | 4 | 2.5 | 1.2 | 1.5 | N/A |
9 | RC0343-4-1006 | 43 | 6 | 4 | 1.0 | 0.3 | 0.6 | 19 |
10 | RS08285-4-2015 | 28.5 | 15 | 4 | 2.0 | 0.8 | 1.2 | N/A |
11 | RS0643-4-1515 | 43 | 15 | 4 | 1.5 | 0.6 | 1.0 | 20 |
- - - -




KIM CHEN INDUSTRY INTL LIMITED Products

High Wear Resistance Ruby Wire Guide With Ra0.1 Roughness
1.Material: Rubyinwireoutlet , Ceramicinwireinlet , Stainlesssteelbody 2.Application: CNCautomaticwindingmachine 3.rubynozzleforNittokuwindingmachine 4.rubytipcoilwindingnozzle High Wear Resistance Ruby Wire Guide With Ra0.1 Roughness - - - - PlaceofOrigin: |...,High Wear Resistance Ruby Wire Guide With Ra0.1 Roughness, wire guide tubes, wire guide nozzle
 
Tungsten Carbide Coil Winding Nozzle Guide / Wire Guide Needles
1.Material:Tungsten Carbide 2.Application:Nittoku winding machine 3.Tungsten carbide wire guide nozzles 4.wire guide needles Tungsten Carbide Coil Winding Nozzle Guide / Wire Guide Needles - - - - Material: | TungstenCarbide | Application: | CNCautomaticwindingmachine |...,Tungsten Carbide Coil Winding Nozzle Guide / Wire Guide Needles, wire guide tubes, wire guide nozzle
 
Coil Winding Wire Tensioner With φ0.04 - φ0.08 mm
# # coil winding tension Unit # coil winding wire tensioner # Wire tensioner # Mechanical wire tensioner YZ2S Mechanical Coil Winding Wire Tensioner With 004 - 008 mm - - - - PlaceofOrigin: | DongGuanChina | BrandName: | KIMCHEN | Model: | YZSeries |...,Coil Winding Wire Tensioner With φ0.04 - φ0.08 mm, Coil Winding Wire
 
Solid Coil Winding Electronic Tensioner With 3 - 15g METSS
# # Design:CompactandSolid # Power: DC24V # CoilWindingTensioner # electronictensiondevice # CoilWindingElectronicTensioner Solid Coil Winding Electronic Tensioner With 3 - 15g METSS - - - - PlaceofOrigin: | DongGuanChina | BrandName: | KIMCHEN | Model: |...,Solid Coil Winding Electronic Tensioner With 3 - 15g METSS, Mechanical Wire Tensioner,Electronic Wire Tensioner
 
Permanent Magnetic Coil Winding Wire Tensioner With 5m/s MTCM
# # Feature:UsingPermanentmagnet # Application:Windingmachine # Suit: Highandnormalspeedwinding Permanent Magnetic Coil Winding Wire Tensioner With 5m/s MTCM - - - - PlaceofOrigin: | DongGuanChina | BrandName: | KIMCHEN | Model: | MTCSeries | Feature:...,Permanent Magnetic Coil Winding Wire Tensioner With 5m/s MTCM, Magnetic Wire Tensioner,Electronic Wire Tensioner
 
MT-30 Permanent Magnet Wire Tension Unit For Coil Winding Machine
# # Application:Windingmachine # Function:TensionControl # wire tensioner # magnetic wire tensioner MT-30 Permanent Magnet Wire Tension Unit For Coil Winding Machine - - - - PlaceofOrigin: | DongGuanChina | BrandName: | KIMCHEN | Model: | MTSeries |...,MT-30 Permanent Magnet Wire Tension Unit For Coil Winding Machine, Magnetic Wire Tensioner,Electronic Wire Tensioner
 
MTA-30 Magnetic Tensioner with Cylinder For Coil Winding Machine
# # Application:Windingmachine # Function:TensionControl # magnettensionerforcoilwindingmachine # magnettensionunitforTANACwindingmachine MTA-30 Magnetic Tensioner with Cylinder For Coil Winding Machine - - - - PlaceofOrigin: | DongGuanChina | BrandName: | KIMCHEN...,MTA-30 Magnetic Tensioner with Cylinder For Coil Winding Machine, Magnetic Wire Tensioner,Electronic Wire Tensioner
 
1.2A Coil Winding Wire Tensioner For Wire Jump Prevention METS
# # Design: CompactandSolid # Electronic Tensioner RM Series # electronic tension device # Coil Winding Electronic Tensioner 1.2A Coil Winding Wire Tensioner For Wire Jump Prevention METS - - - - PlaceofOrigin: | DongGuanChina | BrandName: | KIMCHEN |...,1.2A Coil Winding Wire Tensioner For Wire Jump Prevention METS, Magnetic Wire Tensioner,Electronic Wire Tensioner
 
MTA-30 Magnetic Wire Tensioner with Cylinder For Coil Winding Machine
# # Application:Windingmachine # Function:TensionControl # magnettensionerforcoilwindingmachine # magnettensionunitforTANACwindingmachine MTA-30 Magnetic Tensioner with Cylinder For Coil Winding Machine - - - - PlaceofOrigin: | DongGuanChina | BrandName: | KIMCHEN...,MTA-30 Magnetic Wire Tensioner with Cylinder For Coil Winding Machine, magnet wire tensioner, magnetic tensioner
 
High Speed Mechanical Wire Tensioner For Tanac Winding Machine
# # Function:TensionControl # magnetic tension unit # magnet tension unit # magnetic tensioner for coil winding machine High Speed Mechanical Wire Tensioner For Tanac Winding Machine - - - - PlaceofOrigin: | DongGuanChina | BrandName: | KIMCHEN | Model: |...,High Speed Mechanical Wire Tensioner For Tanac Winding Machine, coil winding wire tensioner, magnetic tensioner
 
5m / s Magnetic Wire Tensioner With φ0.14 - φ0.40mm MT-30
# # Application:Windingmachine # Function:TensionControl # wire tensioner # magnetic wire tensioner 5m / s Magnetic Wire Tensioner With 0.14 - 0.40mm MT-30 - - - - PlaceofOrigin: | DongGuanChina | BrandName: | KIMCHEN | Model: | MTSeries |...,5m / s Magnetic Wire Tensioner With φ0.14 - φ0.40mm MT-30, magnet wire tensioner, coil winding wire tensioner
 
 
Contact Info
URL:
TEL:
Fax:
Country: China
Address:
NO67,Baihua Road,The 3th Industrial Area, Shijie Town, Dongguan , Guangdong

Send Inquiry

 
Company:
*Contact:
*Email:
URL:
TEL:
Fax:
Country:
Address:
*Subject:
Comment:
 

 
 
 
  Contact Us Site Map About Us Trade Links
2005-2014 copyright by twfta.com. All rights reserved.